Viking DIMM 480GB SSD

31,058 30,952

Out of stock

Found this product at a lower price?
SKU: VRFSD4480GHCTMTJ Category: Tag:


SATADIMM Solid State Drive
SATADIMM is the first and only enterprise class SSD to be designed in a DIMM form factor making it possible to deploy SSDs in unused DRAM sockets.

Best Fit Applications
SATADIMM is the ideal boot drive for high-performance servers and storage appliances delivering just the right capacity without sacrificing drive bays that are better suited for mass storage. SATADIMM’s optimized performance and endurance makes it perfect as a cache solution to accelerate applications, especially VMware. In a storage array appliance, SATADIMM provides a 5x advantage in performance and capacity over using 2.5-inch SSDs.

Mitigate Human Error
Booting and caching are just two applications where the removability of a hard drive form factor can be problematical. Imagine the ramifications of a degraded or downed system resulting from an operator removing the boot or cache drive by mistake. The ultra-reliable SATADIMM is safely stored away inside the server ensuring this sort of catastrophe is easily avoidable.
Unsurpassed Server Capacity & Performance

Form is Function: this high-performance and high-availability SSD offers significant increases to typical server capacity and performance at a fraction of the volumetric density of a 2.5-inch SSD. It’s a simple advantage: a server with SATADIMM will have greater capacity and performance than a server with storage only in drive bays.


  •     Capacities 480GB
  •     Best in class SATA III (6Gb) sequential and random performance
  •     No data loss upon power failure
  •     MLC and SLC NAND flash supported
  •     Data compression for industry-leading endurance
  •     Protection against catastrophic flash sector/page/block failures

Sustained Read / Write : 520 MB/s
Sustained Random Read & Write IOPS : Up to 60,000 IOPS
Interface : SATA 6Gb

ECC : 55bit / 512 BCH
Bit Error Rate (BER) : <1 in 1017 bits read
Power Fail Data Protection : Yes
Endurance : *5 Years
Tiered Error Protection : Data recovery from sector, page, and block failure. End-to-End CRC protection
Temperature Monitoring : On-board sensor, S.M.A.R.T. Attribute

Shock : 50g, 11ms, 3 shocks applied in each direction on 3 mutually perpendicular axis
Vibration : 16.4g rms 10 – 2,000 Hz, 3 axis
Operating Temperature : -40°C to 85°C
Non-operating Temperature : -40°C to 85°C
Altitude : 80,000 feet
Humidity : 5% to 95%, non-condensing, relative
Safety / Agency / Compliance : FCC, CE, TUV

Power Voltage : 1.5V – 3.3V 5%
Active : <6.0 Watts
Idle : 0.9 Watts

Form Factor : JEDEC MO-269F
Length : 133.35mm (length) x <30.00mm*** (height) x 6.75mm (thick)
SATA Connectivity : **Standard SATA Connector
SATADIMM Scalability Advantages
Existing deployed servers :

  • Can enable SSD performance without sacrificing HDD drive bays
  • Can scale depending on available DDR3 DIMM sockets
  • Price and performance can scale over time
  • Does not occupy precious PCIe slots, which are best suited to HBA’s
  • Can optimize servers for fast boot solution
  • Very low power consumption compared to HDD & PCIe SSDs
  • Upgrades existing servers without disrupting current storage
Random Read IOPS
Random Write IOPS
Max Sequential Write



User Type



There are no reviews yet.

Be the first to review “Viking DIMM 480GB SSD”

Your email address will not be published. Required fields are marked *

Close ✕

Mobile Menu





User Type

Memory Components

Max Sequential Read

Max Sequential Write

Random Read IOPS

Random Write IOPS


Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)