Sale!

Sabrent 1TB Rocket Nvme PCIe Gen4 x 4 M.2 2280 Internal SSD With Heatsink SB-ROCKET-NVMe4-HTSK-1TB

15,200

-18%
  • NVMe M.2 PCIe Gen4 x4 Interface. PCIe 4.0 Compliant / NVMe 1.3 Compliant
  • Power Management Support for APST / ASPM / L1.2
  • Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface
  • Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision
  • Preinstalled Rocket NVMe Heatsink. Upgradeable Firmware

Out of stock

Notify me when the item is back in stock.

Found this product at a lower price?

Sabrent 1TB Rocket Nvme PCIe Gen4 x 4 M.2 2280 Internal SSD With Heatsink SB-ROCKET-NVMe4-HTSK-1TB

Overview : 

The Sabrent 1TB Rocket Nvme PCIe 4.0 M.2 2280 Internal SSD Maximum Performance Solid State Drive With Heatsink (SB-ROCKET-NVMe4-HTSK-1TB) delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface.

Based on Toshiba’s BiCS4 96L TLC NAND Flash memory, its performance speeds can reach up to 5000 MB/s (read) and 4400 MB/s (write) when using a PCIe Gen4 motherboard. Using a PCIe Gen3 Motherboard Speeds will reach up to 3500 MB/s (read) and 3400 MB/s (write). Power consumption is much lower than traditional hard drives, making it the best embedded solution for new systems.

The Sabrent 1TB Rocket Nvme PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 5000 MB/s (read) and 4400 MB/s (write), significantly faster than PCIe 3.0.

Note: In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED. Otherwise it will be at pcie gen 3 speed at max of 3500MB/s.

The Sabrent 1TB Rocket Nvme PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen 3 PCIe motherboard will enable the user to reach speeds of up to 3500 MB/s (read) and 3400 MB/s (write).

When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance. This Sabrent 500GB Rocket Nvme PCIe 4.0 M.2 2280 Internal SSD comes with the Sabrent M.2 2280 SSD Rocket Heatsink preinstalled.

Features:

• NVMe M.2 PCIe Gen4 x4 Interface.
• PCIe 4.0 Compliant / NVMe 1.3 Compliant.
• Power Management Support for APST / ASPM / L1.2.
• Supports SMART and TRIM commands.
• Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
• Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision.
• Preinstalled Rocket NVMe Heatsink.
• Upgradeable Firmware.

 

Package contents:

• 1TB Rocket Nvme PCIe 4.0 M.2 2280 SSD with Heatsink.
• User Manual.

 

Specification : 

Model # SB-ROCKET-NVMe4-HTSK-1TB
Capacity 1000GB
NAND 3D BiCS4
Controller PS5016-E16
Interface PCIe Gen4 x 4
Certifications CE,FCC,BSMI,RoHS,VCCI
Max Sequential Read 5000 (MB/s)
Max Sequential Write 4400 (MB/s)
Random 4K QD32 (IOPS) Read*1 750K
Random 4K QD32 (IOPS) Write*1 750K
Random 4K QD32 (IOPS) Read*2 600K
Random 4K QD32 (IOPS) Write*2 500K
Power Consumption R/W 6.1 / 5.9
Power Supply 3.3V
Form Factor M.2 2280
Height 3.7mm
Width 22mm
Length 80mm
Operating Temperature 0~70°
Storage Temperature -40~85°C
MTBF 17,00,000
Shock Resistant 1500G
Data Correction LDPC
HeatSink Yes
Warranty 5 years with registration
TBW 1800

 

Additional information

Weight 0.1 kg
Brand

Capacity

Interface

Max Sequential Read

Max Sequential Write

Memory Components

Warranty

User Type