Viking DIMM 240GB SSD

Viking DIMM 240GB SSD

Availability: In stock




Category: .

Tag: .


SATADIMM Solid State Drive
SATADIMM is the first and only enterprise class SSD to be designed in a DIMM form factor making it possible to deploy SSDs in unused DRAM sockets.

Best Fit Applications
SATADIMM is the ideal boot drive for high-performance servers and storage appliances delivering just the right capacity without sacrificing drive bays that are better suited for mass storage. SATADIMM’s optimized performance and endurance makes it perfect as a cache solution to accelerate applications, especially VMware. In a storage array appliance, SATADIMM provides a 5x advantage in performance and capacity over using 2.5-inch SSDs.

Mitigate Human Error
Booting and caching are just two applications where the removability of a hard drive form factor can be problematical. Imagine the ramifications of a degraded or downed system resulting from an operator removing the boot or cache drive by mistake. The ultra-reliable SATADIMM is safely stored away inside the server ensuring this sort of catastrophe is easily avoidable.
Unsurpassed Server Capacity & Performance

Form is Function: this high-performance and high-availability SSD offers significant increases to typical server capacity and performance at a fraction of the volumetric density of a 2.5-inch SSD. It’s a simple advantage: a server with SATADIMM will have greater capacity and performance than a server with storage only in drive bays.


  •     Capacities 240GB
  •     Best in class SATA III (6Gb) sequential and random performance
  •     No data loss upon power failure
  •     MLC and SLC NAND flash supported
  •     Data compression for industry-leading endurance
  •     Protection against catastrophic flash sector/page/block failures

Sustained Read / Write : 520 MB/s
Sustained Random Read & Write IOPS : Up to 60,000 IOPS
Interface : SATA 6Gb

ECC : 55bit / 512 BCH
Bit Error Rate (BER) : <1 in 1017 bits read
Power Fail Data Protection : Yes
Endurance : *5 Years
Tiered Error Protection : Data recovery from sector, page, and block failure. End-to-End CRC protection
Temperature Monitoring : On-board sensor, S.M.A.R.T. Attribute

Shock : 50g, 11ms, 3 shocks applied in each direction on 3 mutually perpendicular axis
Vibration : 16.4g rms 10 – 2,000 Hz, 3 axis
Operating Temperature : -40°C to 85°C
Non-operating Temperature : -40°C to 85°C
Altitude : 80,000 feet
Humidity : 5% to 95%, non-condensing, relative
Safety / Agency / Compliance : FCC, CE, TUV

Power Voltage : 1.5V – 3.3V 5%
Active : <6.0 Watts
Idle : 0.9 Watts

Form Factor : JEDEC MO-269F
Length : 133.35mm (length) x <30.00mm*** (height) x 6.75mm (thick)
SATA Connectivity : **Standard SATA Connector
SATADIMM Scalability Advantages
Existing deployed servers :

  • Can enable SSD performance without sacrificing HDD drive bays
  • Can scale depending on available DDR3 DIMM sockets
  • Price and performance can scale over time
  • Does not occupy precious PCIe slots, which are best suited to HBA’s
  • Can optimize servers for fast boot solution
  • Very low power consumption compared to HDD & PCIe SSDs
  • Upgrades existing servers without disrupting current storage

Additional Information




Viking SSD


There are no reviews yet.

Be the first to review “Viking DIMM 240GB SSD”